Aquazepp DPV Stand


You spend £2500 on a Aquazepp DPV and have to lay it on blocks of wood or file down the prop spindle cap to stand it upright on the prop cowling, no I don't think so. That's why we had this lightweight but strong aluminium stand made for our Aquazepp DPVs.
Aquazepp DPV Stand

Stand Construction

Constructed from 25 mm Aluminium box section and TIG welded at the joints and then sand blasted to give a matt but hard wearing finish to it. The feet have a single hole drilled in each corner to allow fixing to a vehicle floor if required. Black waterproof foam strips are fixed to the curved seating area to pad the Scooter housing when it is placed in the stand.
Stand Construction

  Aquazepp Fitting

The stand has been constructed around our model Aquazepps which are custom made four speed 90 cm models with 1100 watt motors, but to the best of our knowledge all Aquazepp body diameters are the same size and our Aquazepps are the shortest models available so it should fit the other models okay. As you can see from the photos the Aquazepp sits low in the stand so as to eliminate it rolling out of the stand when the stand is fixed to a vehicle floor.
Aquazepp Fitting
 

Purchasing & Payment

The stand takes time to cut, weld and finish so this obviously reflects in the price, but when you have spent £2000 upwards on your new Aquazepp you will want to look after it. The cost is £100 including VAT. Please call or e-mail us if you are interested in purchasing an Aquazepp DPV stand.




Purchasing & Payment

Custom Divers are the European distributors for the InnerSpace Systems Megalodon CCR. Take a look at info and photos of the Meg.
Megalodon CCR




New Prices
Great value training for EFR and EFR Instructor


part of http://www.equinoxtraining.org
Copyright © Elite Divers 2000 - All rights reserved - Privacy policy
Best viewed with Internet Explorer 6 or above at a minimum screen resolution of 1024 x 768